- Products
- Case Studies
- News & Events
- Downloads
- Customer Service
- About Us
- Contact Us
Electrochlor Mineral Chlorinator
Waterco’s Electrochlor Mineral Chlorinator makes your pool smarter by automatically taking care of sanitisation, filtration and auxiliary equipment so you don’t have to!
-
A chlorine generator’s main function is to produce chlorine for the pool, which is essential in preventing the recurrence of common strains of algae and bacteria. The chlorine then turns back into salt and the system continues as long as the generator is functioning properly
-
Electrochlor Power Pack – automatically monitors chlorine production by regulating the amount of electrical energy supplied to the Electrolytic Salt Cell.
-
Electrolytic Salt Cell – consists of a series of titanium electrodes with opposite charges. Waterco’s clear salt cell housing, is constructed using clear UV stabilised acrylic, and allows you to visually inspect the salt cell plates
-
Electrochlor was specially designed to work in synergy with Waterco’s Mineral Crystals to transform your pool into a therapeutic oasis.
Magnesium has been recognised by medical professionals and consumers all over the world for its ability to alleviate a variety of ailments relating to the skin, muscles and nervous system. Absorbing Magnesium, directly through your skin as you swim, provides a range of lifestyle benefits.
Mineral Crystals not only improves your pool water with a blend of naturally occurring minerals but also moisturises your skin as you swim.Its gentle formulation that has little to no taste and can be. used in any type of pool.
Waterco’s Electrochlor Mineral Chlorinator makes your pool smarter by automatically taking care of sanitisation, filtration and auxiliary equipment so you don’t have to!
Features
Easy-to-read display screen: a snapshot of your pool’s temperature and everything you need to know about your pool’s current functions are clearly displayed in one place.
Variable speed pump compatibility: automatically changes the speed of your Waterco variable speed pump at the desired cycle if required.
Dual-pump control: control another pump in conjunction with a variable speed pump simultaneously, which means you can operate your in-floor pool cleaning pump or pressure pool cleaner at the same time as your main pool pump.
Actuator control: connect a valve actuator to divert water flow and activate the correct speed on a variable speed pump for your pool’s water feature or for in-floor pool cleaning.
Easily manage auxiliary equipment: switch on and off lights, ozone generators and other auxiliary equipment using a secondary General Purpose Outlet (GPO) which can be activated independently or set in conjunction with other pool equipment.
No water flow detection: Electrochlor is smart enough to detect if there is no flow to the pool and adjusts the speed of a variable speed pump to overcome low water flow. If adequate water flow is not restored, the pump will switch off to prevent potential damage to your pool equipment.
Low chlorine mode: low chlorine production can be easily activated via a pool cover or a pool controller by sending a signal to the chlorinator.
Built-in alarm system: Electrochlor takes the guesswork out of maintaining pool equipment by displaying alarm messages in the event of a malfunction.
A quick troubleshooting: a diagnostic menu helps service technicians quickly identify potential issues.
FAQ
- Is there a difference between ‘Salt Chlorinator’ chlorine and ‘normal’ chlorine?
A salt chlorinator makes chlorine the same way a chlorine factory does. The difference is that it is manufactured in your pool. Liquid chlorine is approximately 12.5% pure, whereas Electrochlor’s chlorine is 100% pure.
- Will I ever need to add standard pool chlorine again?
From time to time it may become necessary to add some chlorine to the pool. This may be due to heavy rain or if the chlorine level needs to be shocked back up.
- Does the Mineral Crystals / salt damage pool equipment?
No. Low levels of salt have relatively insignificant corrosive effects on pool fittings and equipment.
- How do I get started?
It’s easy! After installing your salt chlorinator, you simply add the recommended amount of salt to your pool and choose your desired chlorine level.
- How much salt will I need?
1 kg of salt in 1,000 litres of water raises the salt level by 1,000ppm. Therefore, 420 kg of salt will raise a 70,000 litres pool from 0 ppm to 6,000 ppm.
- What type of salt should I use?
High purity salt, it is important that the salt does not contain additives. Any common salt (like table salt) usually has an additive that may have staining properties.
Waterco’s Electrochlor Mineral Chlorinator makes your pool smarter by automatically taking care of sanitisation, filtration and auxiliary equipment so you don’t have to!
Features
Easy-to-read display screen: a snapshot of your pool’s temperature and everything you need to know about your pool’s current functions are clearly displayed in one place.
Variable speed pump compatibility: automatically changes the speed of your Waterco variable speed pump at the desired cycle if required.
Dual-pump control: control another pump in conjunction with a variable speed pump simultaneously, which means you can operate your in-floor pool cleaning pump or pressure pool cleaner at the same time as your main pool pump.
Actuator control: connect a valve actuator to divert water flow and activate the correct speed on a variable speed pump for your pool’s water feature or for in-floor pool cleaning.
Easily manage auxiliary equipment: switch on and off lights, ozone generators and other auxiliary equipment using a secondary General Purpose Outlet (GPO) which can be activated independently or set in conjunction with other pool equipment.
No water flow detection: Electrochlor is smart enough to detect if there is no flow to the pool and adjusts the speed of a variable speed pump to overcome low water flow. If adequate water flow is not restored, the pump will switch off to prevent potential damage to your pool equipment.
Low chlorine mode: low chlorine production can be easily activated via a pool cover or a pool controller by sending a signal to the chlorinator.
Built-in alarm system: Electrochlor takes the guesswork out of maintaining pool equipment by displaying alarm messages in the event of a malfunction.
A quick troubleshooting: a diagnostic menu helps service technicians quickly identify potential issues.